Enjoy a snore-free night's sleep with Somnofit!
Mandibular orthosis SomnoFit is an innovative medical solution designed specifically to treat snoring and mild to moderate apnoea. By effectively clearing the airways thanks to its precise mandibular adjustment, SomnoFit promotes restful sleep without interruption. Its design thermoformable provides a personalised fit for maximum comfort, significantly improving quality of life at night. Using an affordable anti-snoring treatment such as SomnoFit provides an alternative to CPAP masks.
The SomnoFit orthosis for snoring and sleep apnoea uses the recognised principle of mandibular advancement. This technique eliminates or reduces snoring in more than 80% of cases. Dental orthosis customized Somnofit is comfortable to use every day. The device enables 6 setting options that can be adapted to your needs.
Enjoy a snore-free night's sleep with Somnofit!
Mandibular orthosis SomnoFit is an innovative medical solution designed specifically to treat snoring and mild to moderate apnoea. By effectively clearing the airways thanks to its precise mandibular adjustment, SomnoFit promotes restful sleep without interruption. Its design thermoformable provides a personalised fit for maximum comfort, significantly improving quality of life at night. Using an affordable anti-snoring treatment such as SomnoFit provides an alternative to CPAP masks.
The SomnoFit orthosis for snoring and sleep apnoea uses the recognised principle of mandibular advancement. This technique eliminates or reduces snoring in more than 80% of cases. Dental orthosis customized Somnofit is comfortable to use every day. The device enables 6 setting options that can be adapted to your needs.
Swiss
made
Product
Standard
Comfort
Optimal
Description
Snoring and sleep apnoea are two of the most common frequent nocturnal breathing problems which profoundly disrupt sleep, reducing its quality and can have a negative impact on overall health. They manifest themselves as partial or complete obstruction of the upper respiratory tractleading to irregular or noisy breathing, frequent awakenings, chronic fatigue and associated cardiovascular problems.
SomnoFit® mandibular advancement orthosis positions the lower jaw slightly and precisely forward, effectively clearing the space behind the tongue and freeing the upper airways. The simple yet effective mechanical action of the device prevents soft tissue from vibrating and significantly reduces snoring and apnoea episodes.
Regular use of the SomnoFit offers fast, lasting results thanks to more fluid, natural breathing. You'll soon notice a marked reduction in snoring, as well as fewer interruptions in breathing and more natural breathing. general improvement in respiratory comfort. The result is deeper sleep, better physical and mental recovery, and less fatigue during the day.
SomnoFit: the economical and effective alternative to snoring
A medically proven solution: offers optimal effectiveness in the treatment of snoring and mild to moderate apnoea.
Customisable product : by thermoforming at home, ensuring a perfect fit to your dental morphology.
Adjustable efficiency : 6 spare tapes of different lengths are supplied for precise and appropriate adjustment of mandibular advancement.
Hypoallergenic materials : BPA and latex-free.
Technical specifications
The mandibular orthosis features precise, rigorously controlled technical characteristics. For small jaws, it is preferable to use the SomnoFit-S whose volume is reduced.
Dimensions
The dimensions of the SomnoFit anti-snoring device (assembled and ready to use) are designed for optimum fit on medium and large jaws.
Dimensions: 4.6 cm long, 6.2 cm wide and 2.7 cm high.
Gutter width at molar level: 1.7 cm.
Orthosis weight: 28g.
Packed weight: 98g.
Composition
All the components of the SomnoFit orthosis are made from high-quality, biocompatible medical grade materials. The product has been developed to minimise the risk of allergies.
Allergenic components and endocrine disruptors: SomnoFit orthotics are BPA-free and latex-free.
Settings
The two mouth trays (upper and lower arches) are connected by a system of interchangeable synthetic bands. These are supplied in 6 different sizes for optimum adjustment of the advancement of the lower jaw to the user's dentition.
Table of indicative values for mandibular advancement :
| Band No. | +3 | +4,5 | +6 | +7,5 | +9 | +10,5 |
|---|---|---|---|---|---|---|
| Advance (mm) | 3 | 4,5 | 6 | 7,5 | 9 | 10,5 |
Service life, warranty
The lifespan of the device, on average 8 to 15 months, depends on maintenance, acidity in the mouth and mechanical stress. The orthosis should be replaced after 18 months of use. The device is guaranteed only in the event of a manufacturing defect.
Indications
- Snoring.
Moderate apnoea (medical consultation recommended).
- Apnea for occasional use: travel, camping, boating, holidays (medical consultation recommended).
Contraindications
- Wearing a removable dental prosthesis or partial dental prosthesis.
- Pain in the mandibular joint.
- Loose, unstable teeth, upper or lower jaw with fewer than 10 teeth.
- Under the age of 18.
Instructions for use
Adapting the orthosis to your jaw
1- Place the temperature indicator in a saucepan filled with 7 to 8 centimetres of cold water and bring the water up to temperature. Stop the heat source when the centre of the temperature indicator turns from green to red (optimum temperature).
Leave the gutter greater than 3 minutes in hot water.
IMPORTANT: Do not leave gutters in boiling water.
It is important to limit the time between removal from the pan and taking the impression to 10-15 seconds.
2- Stand in front of a mirror. Using a spoon, remove the mouth tray from the hot water and shake it to remove the water. Insert the tray, aligning the black vertical line between the two upper central incisors. Make sure the tray is aligned with the entire dentition, bite down hard and press the front of the tray against the side of the teeth with your fingers. Release the pressure from your teeth and rinse your mouth with cold water. Leave to cool in the mouth for 2 minutes.
3- Repeat the same operation described in 1 for the lower gutter.
However, please observe the following instructions:
- Keep the upper mouthpiece in your mouth.
- Align the black line on the lower gutter with the black line on the upper gutter.
4- Use a cutter or pair of scissors to remove the strip marked +6. Keep the other strips.
5- Attach the flexible strip to the fastening hooks on the upper gutter. The marking must be visible from the outside. Then fix the strip to the hooks on the lower gutter.
Maintenance, service life, warranty
In the morning, remove the brace, clean it with a toothbrush and place it in a container of lukewarm water throughout the day with a tablet of anti-bacterial denture descaler. Rinse with clean water before placing it back in the mouth overnight.
The lifespan of the brace depends on maintenance, acidity in the mouth and teeth clenching (bruxism). The device is guaranteed only in the event of a manufacturing defect.
- Check the condition of the brace daily.
- The orthosis must be changed if any cracks, breaks or deterioration of the material appear.
The effectiveness of the device depends on the anatomy of the user. In the event of sleep apnoea, a check by a specialist is recommended.
Advice
Quality of the dental impression
The comfort and fit of the trays depend on the shape of your teeth, the number of teeth and the quality of the impression taken. Check that the shape of your teeth is correctly imprinted in the tray and, if this is not the case, repeat the impression, taking care to ensure that the temperature is correct and that you apply sufficient force to shape the appliance.
Any awkward parts of the thermoforming material can be cut away.
Any other modification to the device is strictly prohibited.
Adjustment of mandibular advancement using flexible bands
During the first few nights, the user must get used to wearing the device and we initially recommend using the +6 band. This figure represents the advancement in mm of the lower jaw compared to the normal position without the device. Depending on the morphology of the teeth, the actual advancement value may vary.
After a few nights of adjustment, adjust the setting according to the following principles:
- If the jaw pull is too strong and uncomfortable, use a lower value band (for example +4.5 instead of +6).
- If the hum does not decrease sufficiently, use a higher band value (e.g. +7.5 instead of +6). In general, an advance of 4.5 to 7.5 mm is sufficient.
Keep away from light.
At the end of its life, dispose of the device in the bin.
Want to find out more about sleep and snoring?
Read our blog articles to find out more about our explanations and advice on how to sleep better:
Contents of packaging
Upper dental gutters before fitting
Lower dental gutters before fitting
- A dental splint with more than 2 front hooks
- A lower dental tray with 2 back hooks
- A float thermometer
- A ventilated storage box
- A set of 6 flexible strips
- Instructions for use
Delivery
The SomnoFit anti-snoring device is available in many countries around the world, both online and in pharmacies. Check product availability by indicating your country here and order the orthosis to improve your sleep straight away.
Order today and enjoy restful sleep wherever you are in the world!
