Breathe easier, sleep peacefully and eliminate snoring with SomnoFit-S
SomnoFit-S is an innovative mandibular advancement orthosis, developed and made in Switzerlandwhich draws on 20 years of solid scientific experience to effectively treat snoring and mild to moderate obstructive apnoea.
This innovative medical solution uses a proven mandibular advancement mechanism to open up the upper airway. The design of this treatment is based on thermoformable biocompatible materials and an ergonomic design that can be customised to suit the shape of your teeth.
Easy to use and highly flexibleSomnoFit-S offers an ideal balance of therapeutic performance, with 8 adjustable levels and clinical recommendations, comfort and practicalityat home or on the road.
Clinical treatment
proven
Medical equipment
innovative
Effective product
from the 1st night
Orthosis for large jaws
XL / XXL
Description
The anti-snoring orthosis with unique dental comfort:
Snoring and obstructive sleep apnoea are frequent and underestimated respiratory disorders, with proven harmful consequences for the health and well-being of patients. quality of sleepcardiovascular health and daytime vigilance. These pathologies generally result from relaxation of the throat muscles and recoil of the base of the tongue during sleep, causing noisy vibrations of the soft palate in your mouth and sometimes pauses in breathing that are worrying for your health.
SomnoFit-S exerts its therapeutic action through a controlled mandibular advancement of a few millimetresThis treatment repositioned the lower jaw forwards. This mechanical manoeuvre improves air flow in the pharynx, prevents obstructions and eliminates the aerodynamic turbulence responsible for snoring noise.
Right from the startOrthosis users report a significant reduction in snoring episodes and nocturnal respiratory arrest. This product improves the quality of your sleepThe result is that you wake up fresher, with fewer associated symptoms such as chronic fatigue, irritability and headaches.
Illustration of snoring caused by airway obstruction during sleep, without the use of a mandibular advancement orthosis.
Illustration of snore-free sleep thanks to the mandibular advancement orthosis, which opens up the airways and frees up the passage of air.
Adjustment of mandibular advancement
As a general rule, a mandibular advancement of 4 to 7 mm is sufficient to reduce snoring and obstructive sleep apnoea. The anti-snoring orthoses are each supplied with 8 bands of different lengths. This means they can be precisely adjusted to ensure that they are effective, comfortable during the night and tailored to the needs of each user.
The anti-snoring orthosis has a structure innovative which allows the mouthpiece to be optimally adapted to the width of the jaw. Thanks to its flexibility and ultra-low volumeit offers a unique comfort during sleep. The volume of the SomnoFit-S orthosis is reduced by 25% compared to our other product SomnoFit and most anti-snoring orthoses in general. For people with large jawWe also offer the SomnoFit-Bwith the same technology as Somnofit-S.
Somnofit-s: the benefits of an orthosis designed to improve your health.
- Average reduction in apnoea index of 55 %This has been confirmed by independent clinical health studies on orthotics in general (Ferguson et al., 2006).
- The SomnoFit-S orthosis is discreet, easy to wear in your mouth and easy to maintain.compared with more invasive solutions such as CPAP masks.
- Reduced volume of 25% compared with the classic SomnoFit orthosis and other devices.
- 8 strips supplied per product for a perfect adjustment of efficiency.
- SomnoFit-S is classified N°1 ++Testieger++ in the comparative test of orthotics in Germany.
- Structure flexible to adapt to the width of the jaw.
Key features
The orthosis is distinguished by its precise and rigorously controlled technical characteristics.
Dimensions
The dimensions of the SomnoFit-S anti-snoring device (assembled and ready to use) are designed to fit small and medium-sized jaws optimally.
Dimensions: 4 cm long, 6 cm wide and 2.4 cm high.
Gutter width at molar level: 1.6cm.
Orthosis weight: 22g.
Packed weight: 104g.
For large jaws, please refer to the orthosis SomnoFit-B which has been specially designed in larger dimensions.
Composition
All the components of the SomnoFit-S orthosis are made from high quality, biocompatible medical grade materials. The product has been developed to minimise the risk of allergies.
Allergenic components and endocrine disruptors:
Somnofit-S is BPA-free and latex-free.
Settings
The two mouth trays (upper and lower arches) are connected by a system of interchangeable synthetic bands. These are supplied in 8 different sizes for optimum adjustment of the advancement of the lower jaw to the user's dentition.
Table of indicative values for mandibular advancement :
| Band No. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|---|---|---|---|---|---|---|---|---|
| Advance (mm) | 0 | 3 | 4.5 | 6 | 7.5 | 9 | 10.5 | 12 |
Service life, warranty
The lifespan of the device, on average 8 to 15 months, depends on maintenance, acidity in the mouth and mechanical stress. The orthosis should be replaced after 18 months of use. The device is guaranteed only in the event of a manufacturing defect.
Indications
- Snoring.
- Mild to moderate obstructive sleep apnoea (medical consultation recommended).
Contraindications
- Wearing a removable full or partial denture.
- Pain in the mandibular joint.
- Loose, unstable teeth, upper or lower jaw with fewer than 10 teeth.
- Under the age of 18.
- Bruxism (clenching or grinding of the teeth).
Instructions for use
Adapting the orthosis to your jaw
The anti-snoring mouth trays are adapted to the teeth by thermoforming, allowing them to be customised. The trays must be heated and softened in water at 80°C. Then simply place them in the mouth and bite down on each tray. This operation can be repeated 2 or 3 times if necessary.
To thermoform the orthosis, consult the instructions for use :
Somnofit-S orthosis (S/M/L)
You can also watch the instructional video for our anti-snoring product. Don't hesitate to follow the steps in the video to make it easier to adapt the product to your jaw and achieve greater dental comfort.
Cleaning your Somnofit-S mandibular advancement orthosis
Daily use of the product :
In the morning, remove the brace, rinse it with clean water and then gently clean it with a dedicated toothbrush.
Place the product, away from light and at room temperature, all day in a container of warm water with a tablet of anti-bacterial denture descaler.
Rinse with clean water before placing back in the mouth for the night.
Note: If not used for a long time, dry the device thoroughly and place it in its storage box.
Advice
How do you choose the size of your anti-snoring orthosis?
We offer two sizes of anti-snoring brace.
SomnoFit-S mandibular advancement orthosis (standard) :
- For small and medium-sized jaws. If in doubt, choose this size.
Mandibular advancement orthosis SomnoFit-B (large size) :
- For large jaws.
In a nutshell:
- If you have a narrow, small or normal jaw/mouth, we recommend using the SomnoFit-S orthosis.
- If your jaw is large and wide, use the orthotic SomnoFit-B.
Want to find out more about sleep and snoring?
Read our blog articles to find out more about our explanations and advice on how to sleep better:
Contents of packaging
(A) A gutter larger than 1 front hook
(B) A lower gutter with 2 rear hooks
(C) An impression plate
(D) A ventilated storage box
(E) A set of 8 flexible strips
(F) A water temperature indicator (black disc with green centre)
(G) Instructions for use for the device
Delivery
The SomnoFit-S anti-snoring device is available in many countries around the world, both online and in pharmacies. Check product availability by entering your country and order the orthosis to improve your sleep straight away.
Order today and enjoy restful sleep wherever you are in the world!
Once you've received and tested your product, share your experience by leaving a review to help other users sleep better.
Complementary products
As part of a global therapeutic approach tailored to each profile, we invite you to discover our other devices such as nasal dilators, positioning pillows or positional treatment belts:
Scientific references
- Marklund, M. et al. (2004). "Mandibular advancement devices in 630 men and women with obstructive sleep apnea and snoring: tolerability and predictors of treatment success." Chest, 125(4): 1270-1278. Read the study.
- Ulfberg, J. et al (1997). "Positional therapy in sleep apnea." Sleep and Breathing, 1(3): 137-139. Read the study.
- Kushida, C.A. et al. (2006). "Practice Parameters for the Treatment of Snoring and Obstructive Sleep Apnea with Oral Appliances: An Update for 2005." Sleep, 29(2): 240-243. Read the study.
- Ferguson, K.A. et al. (2006). "Oral appliances for snoring and obstructive sleep apnea: a review." Sleep, 29(2): 244-262. Read the study.
- Serra-Torres, A. et al. (2020). "Effectiveness of mandibular advancement devices in obstructive sleep apnea: a meta-analysis of long-term results." Journal of Clinical Medicine, 9(5): 1470. Read the study.
